App Provides A Cheap Way to Remotely Focus Blackmagic Cameras

A new app for the iPhone could save users hundreds of dollars by letting them remotely pull focus, with LIDAR, using an iPhone 12 or above. The app is called Focus Pullerand it is aimed at Blackmagic users on a budget.

Focus Puller mimics many of the features found in the DJI LIDAR Rangefinder, but without the $ 600 plus price tag, and doesn’t require the DJI Ronin RS3 Gimbal for support. All a user needs is a Blackmagic camera, an inexpensive magic arm, and a modern iPhone with a LIDAR sensor.

The app connects to Blackmagic cameras via Bluetooth and provides remote focus pulling on lenses that support electronic autofocus. Users need to drill down into the Blackmagic setup menu, and on the second to last page, there is a Bluetooth auto-connect option to turn on. Users then receive a code to input into the app, which connects the phone to the camera.

Once connected, the app can control the manual focus at a range of up to thirty feet using the iPhone. The app also sets markers, so that the camera will rack focus from one distance to the next. The feature is very smooth, but the speed cannot be adjusted, so it’s fairly instant and not a gentile pull. Still, it works, and Tobin says there is no latency.

The real benefit of Focus Puller, however, is that the app can send the iPhone’s LIDAR data to the Blackmagic camera and manage to focus in 3D space. Much like with the DJI LIDAR Rangefinder. The use of a magic arm and a smartphone mount is necessary to physically align the phone with the lens being used, and then it must be calibrated to manage the LIDAR distance data. Users can try a calibration from the camera’s cold shoe, and eliminate the arm, but the distance will be a few inches off, which could affect the focus pull.

The calibration routine requires an initial 15-step process to teach the camera where points are in 3D space. Users know that the LIDAR option is calibrated when a focusing dot in the middle of the image turns green, which shows the camera is using the LIDAR data properly.

This can be a tedious and “super nerdy” process that is far more involved than the two-point procedure on the DJI LIDAR Rangefinder. The magic arm setup can also be a bit “janky,” as it can move around while the camera moves. However, Tobin says it does the job well enough for achieving an advanced, LIDAR-based rack focusing on a budget.

The app is free to download from the IOS App Store. Users can experiment with calibrating the camera and lenses, and test the focus pulling for themselves. But once the user desires to record using the data, there is a $ 12 fee to unlock it.


Image credits: All photos by Michael Tobin.